• <legend id="dtkv0"></legend>
    <tr id="dtkv0"></tr><tr id="dtkv0"></tr><big id="dtkv0"></big><ol id="dtkv0"></ol><tr id="dtkv0"></tr>

      Welcome to Whole Win (Beijing) New Energy Technology Company Limited

      Add to favorite| Contact Us Chinese| English

       

      Company Product Website:Home Products Company Product

      Metal Hydride Hydrogen Storage Device


      Introduction

      The principle of this device is utilizing the selective absorbing ability of hydrogen storage alloys inside to absorb and release hydrogen under certain room temperature and pressure. It has realized solid hydrogen storage, safe without any leakage or energy lost. Getting through the appraisal of research achievement from CNMIA, the whole technique reached international level and some are the leading part.

      Advantages

      It has realized safe hydrogen absorption and release without any leakage or energy lost,. High hydrogen storage density can reach that of liquid hydrogen storage.

      Low operation pressure, safe with long life. The storage volume could keep above 90% of its initial volume after 3000 times cycles.

      It has the function of hydrogen purification to purify the hydrogen to be 99.9999%.

      It is easy to operate. Hydrogen can be stored and released with smooth and steady airflow, which is suitable for the gas source of portable hydrogen equipment.

      The internal part adopts a unique heat and mass transfer structure and alloy filled patent technology, which makes the excellent performance of hydrogen charge and discharge.

      It could control hydrogen pressure and flow rate by adjusting the temperature.


      Photo 1: Application with Photo    2: Application with the Photo  3: Application in the

      hydrogen fuel cells car                  portable gas chromatograph hydrogen storage field


      Specification

      According to the capacity and use, the product is divided into two kinds: hydrogen storage device for instruments and rapid hydrogen storage and supply devices.This device has the advantages of large hydrogen storage density, high purity of hydrogen, airtight and safety, small size and convenient carrying, especially suitable for the supporting hydrogen source of portable instruments such as fuel cell and gas chromatograph. According to different use requirements, we developed two materials tank, stainless steel and aluminum alloy, and can be matched with two valves, needle valve and quick connector.


      Model

      HYM-30S

      HYM -50S

      HYM -100S

      HYM -300S

      HYM -500S

      HYM -750S

      HYM -1000S

      HYM-30SK

      HYM -50SK

      HYM -100SK

      HYM -300SK

      HYM -500SK

      -

      -

      Volume

      30 L

      50 L

      100 L

      300 L

      500 L

      750L

      1000L

      Tank sizemm

      Ф40×L180

      Ф40×L230

      Ф46×L293

      Ф64×L393

      Ф74×L458

      Ф86×L503

      Ф89×L595

      Ф40×L175

      Ф40×L225

      Ф46×L288

      Ф64×L388

      Ф74×L453

      -

      -

      Weightkg

      ≤ 0.9

      ≤ 1.2

      ≤ 2.0

      ≤ 5.5

      ≤ 7.0

      ≤ 12.0

      ≤ 16.0

      ≤ 0.7

      ≤ 0.9

      ≤1.8

      ≤ 5.3

      ≤ 6.8

      -

      -

      Release Speed25

      0.5 L/min

      1 L/min

      1 L/min

      2 L/min

      3 L/min

      4 L/min

      4L/min

      Model

      HYM-400A

      HYM-550A

      HYM-500A

      Volume

      ≥400 L

      ≥550 L

      ≥800 L

      Tank size(mm)

      Ф70×L330

      Ф70×L438

      Ф89×L438

      Weight(kg)

      ≤ 3.5

      ≤ 4

      ≤ 7

      Release Speed(25℃)

      ≥ 2.5 L/min

      ≥ 3.5 L/min

      ≥ 4.5 L/min


      Hydrogen Storage Device for Instruments—Needle Valve

      According to customers' different requirements for the working pressure, this storage unit with needle valve can be divided into three typeshigh pressureG-type),middle pressure Z-type),and low pressureD-type. G-type: working pressure range 0.1-3MPa, the hydrogen charge pressure not exceeding 3 MPa; Z-type: working pressure range 0.1-1.5MPa, the hydrogen charge pressure not exceeding 1.5MPa; D-type: working pressure range 0.1-0.7MPa, the hydrogen charge pressure not exceeding 0.7MPa, of which hydrogen could be charged with hydrogen generator. According to customer requirements, the hydrogen release exit can be configured with a card sleevePhoto 4, threaded and quick connector interfacePhoto 5.


      Hydrogen Storage Device for Instruments—Quick Connector

      The switch of this device could be controlled by the On -Off of quick connector, see Photo 6. According to the customers' different requirements for the working pressure, this storage unit could be divided into two types: middle pressureZ-type),and low pressureD-type. Z-type: working pressure range 0.1-1.5MPa, the hydrogen charge pressure not exceeding 1.5MPa; D-type: working pressure range 0.1-0.7MPa, the hydrogen charge pressure not exceeding 0.7MPa, of which hydrogen could be charged with the hydrogen generator.



      Photo 4: needle valve Photo       5: needle valve with quick connector Photo 6: quick connector


      Hydrogen Storage Device for Instruments—Aluminum Alloy Tank

      Model

      HYM -100A

      HYM -200A

      HYM -300A

      HYM -450A

      HYM -750A

      Volume

      ≥ 100 L

      ≥ 200 L

      ≥ 300 L

      ≥ 450 L

      ≥ 750L

      Tanks sizemm

      Ф51×L240

      Ф60×L330

      Ф80×L260

      Ф90×L275

      Ф108×L345

      Weightkg

      ≤ 2.0

      ≤ 3.5

      ≤ 4.0

      ≤ 6.0

      ≤ 10.0

      Charge Time25

      ≤ 60 min

      ≤ 80 min

      ≤ 90 min

      ≤ 120 min

      ≤ 150 min

      Release Sppeed25

      ≥ 1 L/min

      ≥ 1 L/min

      ≥ 2 L/min

      ≥ 3 L/min

      ≥ 4 L/min


      Rapid Hydrogen Storage and Supply Devices

      Model

      HYM -5M

      HYM -10M

      HYM -20M

      HYM -40M

      HYM-80M

      Volume

      ≥ 5m3

      ≥ 10m3

      ≥ 20m3

      ≥ 40m3

      ≥ 80 m3

      Tank Material

      Stainless Steel

      Stainless Steel

      Stainless Steel

      Stainless Steel

      Stainless Steel

      Storage Pressure

      ≤ 3MPa

      ≤ 3MPa

      ≤ 3MPa

      ≤ 3MPa

      ≤ 3 MPa

      Charge Time25

      ≤ 60min

      ≤ 60min

      ≤ 120min

      ≤ 120min

      ≤ 150 min

      Release Speed (25)

      ≥ 20L/min

      ≥ 35L/min

      ≥ 60L/min

      ≥ 80L/min

      ≥ 200 L/min


      With fast and high flow hydrogen absorption and discharge property, metal hydride hydrogen storage device can provide hydrogen source for various specifications of fuel cells. In addition, it also has a wide range of applications, such as the production of integrated circuits and semiconductors, powder metallurgy, heat treatment, etc. It is an ideal ultra-high purity hydrogen gas source.


      Previous:Accessories

      Next:No Information

      Back

      About Us
      About Us
      Company Product
      Metal Hydride Hydrogen Storage Device
      Accessories
      Metal Hydride Hydrogen Storage and Purification Devices
      Metal Hydride Hydrogen Compressor
      Contact Us
      Contact Us
      Feedback
      Map

      COPYRIGHT ? 2016   Whole Win (Beijing) New Energy Technology Company Limited.   All Right Reserved.    Support:WebQd